This document will be updated on a regular basis and posted to MOL.
Please refer to MOL for the latest version of frequently asked questions
Motorola CPS | RSS Software Programming
Programming MotoTRBO DMR Radios - The Basics
Programming MotoTRBO DMR Radios - The Basics
https://www.youtube.com/watch?v=aFljVjNvz-c
Here I show you how to program a basic DP3400 radio so that it will work on your frequencies. I also show you how to create unique group IDs etc.
Here I show you how to program a basic DP3400 radio so that it will work on your frequencies. I also show you how to create unique group IDs etc.
RSSI meter on Motorola Mototrbo XPR75xx and XPR65xx
RSSI meter on Motorola Mototrbo XPR75xx and XPR65xx
Motorola MotoTRBO equipment. It’s quite easy. Press the left arrow 3 times followed by pressing the right arrow three times.
Motorola Mototrbo XPR75xx and XPR65xx:
Left arrow <<< three (3) times / Right arrow >>> (3) times
Motorola Mototrbo SL7550:
push center Main Menu: up (3) three time / down (3) three time = RSSI meter.
Motorola MotoTRBO equipment. It’s quite easy. Press the left arrow 3 times followed by pressing the right arrow three times.
Motorola Mototrbo XPR75xx and XPR65xx:
Left arrow <<< three (3) times / Right arrow >>> (3) times
Motorola Mototrbo SL7550:
push center Main Menu: up (3) three time / down (3) three time = RSSI meter.
Updating Motorola Firmware
Updating Motorola Firmware
The upgrade is fairly self-explanatory, pull down "Device-> Update-> version" and in the box, select version to the file. The procedure will have you reset the radio (power off and on again), and take about 10-15 minutes.
Be VERY patient as it will look like nothing is going on while it loads the firmware to the radio. It may even say CPS is not responding. Just walk away from the computer and go watch TV for awhile and let it do its thing.
Disable any power management, screen savers etc prior and make sure you have a fresh hot battery on the radio if not mobile.
The upgrade is fairly self-explanatory, pull down "Device-> Update-> version" and in the box, select version to the file. The procedure will have you reset the radio (power off and on again), and take about 10-15 minutes.
Be VERY patient as it will look like nothing is going on while it loads the firmware to the radio. It may even say CPS is not responding. Just walk away from the computer and go watch TV for awhile and let it do its thing.
Disable any power management, screen savers etc prior and make sure you have a fresh hot battery on the radio if not mobile.
CPS 11.0 BUILD 596 25KHZ PATCH
CPS 11.0 BUILD 596 25KHZ PATCH
DLL for the entitlement
PLEASE unzip and copy the uncompressed "dll" files into the Motorola CPS folder in the [program files] area !
unzip the files and copy and paste after unzip to the following file location.
These unzipped two files enable wideband 25khz programing on all radios including 5550 and 7550 and the new lite models.
All one has to do is extract the dll and lmx file overwriting those of the same name it c:\program files\mot0rola\m0totrbo cps\
After complete the analog frequencies can be added 25khz programing into the radio.
Subscribe to:
Posts (Atom)